 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FUJITSU MEDIA DEVICE DATA SHEET DS04-23119-2E ASSP Mobile Communication Systems SAW Filter (700 to 1000 MHz) F5CM Series (B2) s DESCRIPTION The F5CM series of SAW filters have balanced in/unbalanced out or unbalanced in/balanced out of I/O ports. Therefore these filters are suitable for the design using balanced type of IC. By using these filters, any transforming devises, such as balun is not required. The F5CM series filters apply to the frequency range 700 to 1000MHz. High performance has been realized with high reliability and small size by using original materials and original design. The F5CM series filters are suitable for RF interstage filter in mobile communication systems and standard parts are available for GSM and AMPS/TDMA/CDMA standards. s FEATURES * * * * * * Balanced/unbalanced I/O ports Ultra compact and light package (3.0 mm x 3.0 mm package) Any external matching network is not required Excellent stopband attenuation Small inband ripple Surface mount package (SMT) s PACKAGE F5CM Series (B2) s PIN ASSIGNMENT (BOTTOM VIEW) 1 2 3 6 5 4 s PIN DESCRIPTION * BALANCED IN/UNBALANCED OUT type (Tx filter) Pin no. Pin name Description 1 2 3 4 5 6 GND OUT GND IN GND IN Ground Pin Unbalanced output Ground Pin Balanced Input Ground Pin Balanced Input * UNBALANCED IN/BALANCED OUT type (Rx filter) Pin no. Pin name Description 1 2 3 4 5 6 GND IN GND OUT GND OUT Ground Pin Unbalanced Input Ground Pin Balanced Output Ground Pin Balanced Output 2 F5CM Series (B2) s ABSOLUTE MAXIMUM RATINGS Parameter Operating temperature Storage temperature Input power Input DC Voltage Symbol Ta Tstg Pin DCin Rating Min. -30 -40 -- -5 Max. +85 +100 +15 +5 Unit C C dBm V WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. s RECOMMENDED OPERATING CONDITION Parameter Operating temperature Symbol Ta Value Min. -30 Max. +85 Unit C WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. s STANDARD FREQUENCIES Applications Frequency (MHz) 902.5 947.5 942.5 836.5 881.5 Band width (MHz) 25 25 35 25 25 Input type/ Impedance Balance 50 Unbalance 50 Unbalance 50 Balance 50 Unbalance 50 Output type/ Impedance Unbalance50 Balance50 Balance150 Balance50 Unbalance50 Balance50 Part number Part symbol 63 60 62 70 68 66 Tx GSM Rx EGSM AMPS/ TDMA/ CDMA Rx Tx Rx FAR-F5CM-902M50-B263 FAR-F5CM-947M50-B260 FAR-F5CM-947M50-B262 FAR-F5CM-942M50-B270 FAR-F5CM-836M50-B268 FAR-F5CM-881M50-B266 3 F5CM Series (B2) s ELECTRICAL CHARACTERISTICS 1. GSM (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT Part number: FAR-F5CM-902M50-B263 (Ta = -30C to + 85C) Parameter Insertion loss Inband ripple Conditions 890 to 915 MHz 890 to 915 MHz DC to 845 MHz 845 to 870 MHz Absolute attenuation 935 to 980 MHz 980 to 2000 MHz 2000 to 3000 MHz Value Min. -- -- 45 25 25 40 30 Typ. 3.2 1.2 58 50 30 58 37 Max. 3.5 1.5 -- -- -- -- -- Unit dB dB dB dB dB dB dB Remarks 2. GSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-947M50-B260 (Ta = -30C to + 85C) Parameter Insertion loss Inband ripple Conditions 935 to 960 MHz 935 to 960 MHz DC to 890 MHz 890 to 915 MHz Absolute attenuation 980 to 1025 MHz 1025 to 2000 MHz 2000 to 3000 MHz Value Min. -- -- 45 25 25 40 35 Typ. 3.0 0.9 56 31 30 50 45 Max. 3.3 1.2 -- -- -- -- -- Unit dB dB dB dB dB dB dB Remarks 3. GSM (Rx) 50 ohms Unbalanced IN/150 ohms Balanced OUT Part number: FAR-F5CM-947M50-B262 (Ta = -30C to + 85C) Parameter Insertion loss Inband ripple Conditions 935 to 960 MHz 935 to 960 MHz DC to 890 MHz 890 to 915 MHz Absolute attenuation 980 to 1025 MHz 1025 to 2000 MHz 2000 to 3000 MHz Value Min. -- -- 45 25 23 40 35 Typ. 3.3 0.8 55 48 29 50 39 Max. 3.8 1.3 -- -- -- -- -- Unit dB dB dB dB dB dB dB Remarks 4 F5CM Series (B2) 4. EGSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-942M50-B270 (Ta = -30C to + 85C) Parameter Insertion loss Inband ripple Conditions 925 to 960 MHz 925 to 960 MHz DC to 880 MHz 880 to 915 MHz Absolute attenuation 980 to 1025 MHz 1025 to 2000 MHz 2000 to 3000 MHz Value Min. -- -- 50 15 23 40 25 Typ. 3.8 1.8 55 22 27 44 39 Max. 4.5 2.5 -- -- -- -- -- Unit dB dB dB dB dB dB dB Remarks 5. AMPS/TDMA/CDMA (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT Part number: FAR-F5CM-836M50-B268 (Ta = -30C to + 85C) Parameter Insertion loss Inband ripple Conditions 824 to 849 MHz 824 to 849 MHz DC to 800 MHz Absolute attenuation 869 to 920 MHz 920 to 2000 MHz 2000 to 3000 MHz Value Min. -- -- 45 25 35 25 Typ. 2.8 0.9 52 33 46 33 Max. 3.5 1.6 -- -- -- -- Unit dB dB dB dB dB dB Remarks 6. AMPS/TDMA/CDMA (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-881M50-B266 (Ta = -30C to + 85C) Parameter Insertion loss Inband ripple Conditions 869 to 894 MHz 869 to 894 MHz DC to 800 MHz 800 to 849 MHz Absolute attenuation 940 to 1000 MHz 1000 to 2000 MHz 2000 to 3000 MHz Value Min. -- -- 45 30 30 35 25 Typ. 2.8 0.8 55 47 38 47 32 Max. 3.5 1.5 -- -- -- -- -- Unit dB dB dB dB dB dB dB Remarks 5 F5CM Series (B2) s TYPICAL CHARACTERISTICS 1. GSM (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT Part number: FAR-F5CM-902M50-B263 log MAG 10 dB/ REF 0 dB 1 : -3.192 dB 0.890 000 000 GHz 1 2 2 : -2.773 dB 0.9150 GHz 3 : -29.56 dB 0.9350 GHz 4 : -34.57 dB 0.9500 GHz FAR-F5CM-902M50-B263 3 4 CENTER 900 MHz SPAN 300 MHz 2. GSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-947M50-B260 log MAG 10 dB/ REF 0 dB 1 : -58.133 dB 0.890 000 000 GHz 2 : -32.723 dB 0.9150 GHz 3 : -2.999 dB 0.9350 GHz 4 : -2.808 dB 0.9600 GHz FAR-F5CM-947M50-B260 3 4 2 1 CENTER 950 MHz SPAN 300 MHz 6 F5CM Series (B2) 3. GSM (Rx) 50 ohms Unbalanced IN/150 ohms Balanced OUT Part number: FAR-F5CM-947M50-B262 log MAG 10 dB/ REF 0 dB 1 : -55.741 dB 0.890 000 000 GHz 2 : -50.182 dB 0.9150 GHz 3 : -3.077 dB 0.9350 GHz 4 : -3.028 dB 0.9600 GHz FAR-F5CM-947M50-B262 3 4 1 2 CENTER 950 MHz SPAN 300 MHz 4. EGSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-942M50-B270 log MAG 10 dB/ REF 0 dB 1 : -3.5649 dB 925. 000 000 MHz 1 2 2 : -2.9961 dB 960 MHz 3 : -59.498 dB 880 MHz 4 : -20.549 dB 915 MHz FAR-F5CM-942M50-B270 4 3 CENTER 950 MHz SPAN 300 MHz 7 F5CM Series (B2) 5. AMSP/TDMA/CDMA (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT Part number: FAR-F5CM-836M50-B268 log MAG 10 dB/ REF 0 dB 1 : -2.566 dB 0.824 000 000 GHz 1 2 -2.763 dB 0.8490 GHz 3 : -33.493 dB 0.8690 GHz 4 : -38.685 dB 0.8940 GHz 2: FAR-F5CM-836M50-B268 3 4 CENTER 850 MHz SPAN 300 MHz 6. AMSP/TDMA/CDMA (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-881M50-B266 log MAG 10 dB/ REF 0 dB 1 : -57.172 dB 0.824 000 000 GHz 2 : -48.219 dB 0.8490 GHz 3 : -2.836 dB 0.8690 GHz 4 : -2.825 dB 0.8940 GHz FAR-F5CM-881M50-B266 3 4 1 2 CENTER 900 MHz SPAN 300 MHz 8 F5CM Series (B2) s MEASURMENT CIRCUIT BALANCED IN/UNBALANCED OUT type (Tx filter) 4 I nput 50 6 13 5 2 Output 50 Input 50 13 5 2 6 UNBLANCED IN/BALANCED OUT type (Rx filter) 4 Output 50 / 150 1 to 6: Pin Number Note: Attached frequency response plots are obtained by simulation using above S21, S31, S32, S11, S22, S33 of each characteristics. Electrical specifications are also decided based on these results. s PART NUMBER DESIGNATION [Designation example] FAR-F5CM- (1) -B2 - (2) (3) (1) Frequency: Center frequency is specified in six alphanumeric. Enter M (for MHz) at the decimal point. Refer to below example. [Example] 902.5 MHz 902M50 (2) Part symbol: Specified characters from 60 to 79. (3) Packing: W: 1000 pcs/reel (Reeled tape) V: 3000 pcs/reel U: 5000 pcs/reel s MARKING LOGO PART SYMBOL DATE CODE F 60 B1 LOT No. INDEX 9 F5CM Series (B2) s PACKAGE DIMENSION 3.0 2-R 0.2 1 2 3 0.75 0.6 6 4-R 0.3 1.2 1.2 5 4 0.75 1.5 1.2 Max. 3.0 Dimensions in mm. 10 F5CM Series (B2) s RECOMMENDED LAND PATTERN 3.0 3.0 0.75 0.70 1.5 1.20 1.20 Dimensions in mm. 0.2 0.75 1.5 0.95 11 F5CM Series (B2) s PACKING: Reel type 1. Reel Dimensions 12.4 2.0 0.5 13.0 0.2 2.0 0.0 Type Volume 250 W V U 1 k pcs 3 k pcs 5 k pcs 21.0 0.8 R1.0 18.4 Max. 80 Dimensions in mm. 2. Packing Style Reel side P ulling s i de #1P IN P ulling side 3. Tape Dimensions 4.0 0.1 2.0 0.05 1.5 0.1 0 0.3 5.5 0.1 1.5 3.3 0.1 4.0 0.1 1.75 0.1 1.5 3.3 0.1 Dimensions in mm. 12 12.0 0.3 F5CM Series (B2) 4. Peel Strength of Top Cover Tape Peel off by the force of 0.1 N to 0.7 N under the condition at the right. (Conforms to JIS C 0806 section 5.2) Direction of pulling Speed 300 mm/min 165 to 180 Embossment carrier type tape 13 F5CM Series (B2) s RECOMMENDED REFLOW PROFILE 240 10 s Heating rate 1 to 4 C /s Temperature[C] 210 Air cooling 60 s Pre-Heating 150 60 90 s Time [s] s NOTE Mass-produced product order is accepted by a unit of 1000. 14 F5CM Series (B2) FUJITSU MEDIA DEVICES LIMITED For further information please contact: Japan FUJITSU MEDIA DEVICES LIMITED International Sales and Marketing Dept. Sin-Yokohama Square Bldg.,14F, Shin-Yokohama 2-3-12, Kouhoku-ku, Yokohama-shi, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076 http://www.fujitsu.co.jp/hypertext/fmd/English/index.html All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. North and South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, San Jose, CA 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/ F0010 (c) FUJITSU LIMITED Printed in Japan |
Price & Availability of FAR-F5CM-947M50-B260
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |